Nexus Switches-Nexus Cheat Sheet
Nexus is one of the dominant switches in data centers, most
companies already rolled out Nexus Switches like 7k,5k and Fabric Extender 2k. Nexus 1k
series is for low latency applications.
The following commands are normally used for Configuring/monitoring
Nexus Switches.
Feature- add a feature in switch feature ssh
Interface
Interface designation
- int eth slot#/port#
Channel-group
# mode active/passive
Int po# (
port-channel)
Example
Channel-group 10 mode active
Int portchannel10
Switchport mode access
Int portchannel10
Switchport mode access
CAM table
To find the port of a host using mac
address
show mac-address-table address [mac
address]
FCOE
Enable fcoe mode
Int x/y
Fcoe mode on/auto
VFC
Interface vfc10
Bind interface e1/10
QOS For FCOE
Class-map class-fcoe
Match cos #
ZONING
VSAN- Virtual Storage Network
Zone name name vasn #
Member pwwn#,fcalias
Zoneset name
To activate
Zoneset activate name [zonename]
vsan #
Example
int fc1/24
vsan database
vsan 102 interface fc1/24
vsan 202 wwn 10:00:00:00:c9:62:ab:a7
fcid 0x010027 dynamic
fcalias name SQL31_hba1_p0 vsan 102
fcalias name SQL31_hba1_p0 vsan 102
member pwwn 10:00:00:00:c9:62:ab:a7
zone name disql31_hba1_p0_4634_10f0
vsan 102
zoneset name Zoneset_B_01242012 vsan
102
zone sql31_hba1_p0_4634_10f0 to zoneset
Zoneset_B_01242012 on VSAN 102
zoneset activate name
Zoneset_B_01242012 vsan 102
FEX
For example 2148T has 48x 1ge server
ports and 4x10GE uplinks
It is managed by 5k or 7k
There is not PORT CHANNEL config
from FEX to server ports
It appears as a line card of Nexus
5k
FEX config managed by 5k and local
memory storage for the config
FEX is discovered by SDP protocol
Define number of uplinks
Conf t
Fex 100
Pinning max-links 4
Attach a FEX to interface
Conf t
Int e3/1
Switchport mode fex-fabric
fex associate 100
exit
verify FEX
show fex 100
or show fex 100 detail
other commands are
show inventory fex 100
show version fex 100
show environment fex 100
show diagnostic result fex 100
show logging onboard fex 100
reload fex 100
show tech-support fex 100
Attach fex
Attach fex 100
reset module in nexus
switch
(config)# slot #
(config-slot)# port
9-16 type fc
(config-slot)# port 1-8 type ethernet (config-slot)# copy running-config startup-config (config-slot)# poweroff module 3 (config)# no poweroff module 3 |
No comments:
Post a Comment