Juniper SRS FW Redundancy

you must connect the fe-0/0/7 port to the fe-2/0/7 port to form the control link. For

SRX240 devices, connect the ge-0/0/1 port to the ge-5/0/1 port to form the control

link. For SRX650 devices, connect the ge-0/0/1 port to the ge-9/0/1 port to form the

control link. For a device from the SRX3000 line, the connection that serves as the

control link must be between the built-in control ports on each device. SRX5000 line

devices do not have built-in ports, so the control link for these gateways must be the

control ports on their Services Processing Cards (SPCs) with a slot numbering offset

of 6 for SRX5600 devices and 12 for SRX5800 devices.



FABRIC PORT CONNECTION



The fabric link connection for the SRX210 must be a pair of either Fast Ethernet or

Gigabit Ethernet interfaces and must be any pair of either Gigabit Ethernet or

10-Gigabit Ethernet interfaces on all other SRX Series devices. Figure 170 on page

912, Figure 171 on page 912, Figure 172 on page 912, Figure 173 on page 913 and Figure

174 on page 913 show pairs of SRX Series devices with the fabric links and control

links connected